| Saint-Petersburg | Moscow | Kazan | Phone 8-800-5555-620

Language: English

Rotators

Rotary devices (rotators) are used for laser processing of cylindrical and conical parts. Synchronization of the workpiece rotation with the movement of the laser beam provides accurate and high-speed laser marking, welding and cutting of such products.

Technical characteristics of rotators for laser systems:

PV60M rotator

It has a solid aluminum base with tilt function. The workpiece is clamped with a Ø65 mm chuck.

Technical characteristics:

  • Angular positioning step: 0,1 millirad.
  • Axis of rotation tilt angle: 0-90 degrees.
  • Dimensions: 180x180x250 mm
  • Weight: 9 kg
  • Chuck type: three-jaw self-centering, keyless clamp

Size and weight of clamped workpiece:

  • Outer diameter: from 3 to 74 mm
  • Inner diameter: from 23 to 72 mm
  • Weight: up to 2 kg

PV60 rotator

It has a lightweight design with a durable aluminum and axis tilt function. The workpiece is clamped either with a Ø65 mm chuck or with a collet clamp.

Technical characteristics:

  • Angular positioning step: 0.16 millirad.
  • Axis of rotation tilt angle: 0-45 degrees.
  • Dimensions: 154х215х126 mm
  • Weight: 4 kg
  • Chuck type: three-jaw self-centering, keyless clamp
  • Collet type: ER20

Dimensions and weight of clamped workpiece:

  • Outer diameter: from 3 to 74 mm
  • Inner diameter: from 23 to 72 mm
  • Weight: up to 1 kg

Diameter of the part clamped in the collet clamp:

From 2.5 to 13 mm (appropriate collets required).

VRP60M rotator

The rotator has a long platform where a motor with a chuck and a tailstock are installed, the position of the tailstock is manually adjusted by sliding it along the guide rails.

The workpiece is clamped either with two cones or with a self-centering chuck Ø65 mm on one side.

The axis of rotation is horizontal.

Technical characteristics:

  • Angular positioning step: 0.1 millirad.
  • Rotation axis angle change: no
  • Dimensions: 630x150x130 mm
  • Weight: 10 kg

Dimensions and weight of the clamped workpiece:

  • Outer diameter: from 3 to 74 mm (up to 95 mm in cones)
  • Inner diameter: from 23 to 72 mm
  • Length: up to 380 mm
  • Weight: up to 2 kg

Laser systems with rotary devices

Rotary devices work will all the laser systems of Laser Center

We have been producing laser equipment in St. Petersburg since 2004
Get a reference list

Download will start after submitting the form